Eaton Electrical IM01005012E Power Supply User Manual


 
IM01005012E XT-40 & IT-RSS Installation
Page 2 Rev. 1 – 2/2007
1.4 Safety Precautions
A licensed/qualified electrician must complete all instructions and measurements described in this
instruction in accordance with the U.S. National Electrical Code, state and local codes, or other applicable
country codes. The U.S. National Electrical Code and state and local requirements (or other applicable
country codes) supersede this instruction. Read and understand all instructions before beginning
installation.
WARNING! The use of the word WARNING in this manual denotes a potential hazard associated
with the use of this equipment. It calls attention to a procedure, practice, or condition, or the like,
which if not correctly performed or adhered to, could result in personal injury or death.
CAUTION The use of the word CAUTION in this manual denotes a potential hazard associated
with the use of this equipment. It calls attention to a procedure, practice, condition, or the like,
which if not correctly performed or adhered to, could result in damage to the equipment.
WARNING! SHOCK HAZARDS:
IMPROPER INSTALLATION CAN CAUSE DEATH, INJURY AND/OR EQUIPMENT DAMAGE.
Follow all warnings and cautions. Completely read and understand the information in this
document before attempting to install or operate this equipment.
IMPROPER WIRING COULD CAUSE DEATH, INJURY, AND/OR EQUIPMENT DAMAGE. Only
licensed/qualified electricians who are trained in the installation and service of electrical devices
are to service this equipment.
USE APPROPRIATE SAFETY PRECAUTIONS AND EQUIPMENT FOR ARC FLASH
PROTECTION.