Filter
Top Products
Using LEAP Security
Important Note! LEAP security requires that all infrastructure devices (e.g. access
points and servers) are configured for LEAP authentication. Check with the IT manager.
To use security In the Atheros Client Utility, access the Security tab in the Profile
Management window.
Configuring LEAP:
The LEAP authentication type uses Cisco Key Integrity Protocol (CKIP) and MMH message integrity
check (MIC) for data protection. The USB device uses the username and password to perform mutual
authentication with the RADIUS server through the access point. To use LEAP security, access the
Security tab in Profile Management.
1. In the ACU, edit the security settings by clicking New or Modify on the
Profile Management tab.
2. Choose a profile to edit, or name the new profile in the Profile
Management window. Enter the SSID of the access point the station
connects to.
3. On the Security tab, choose the WPA radio button.
OR: On the Security tab, choose the 802.1x radio button.
4. Choose LEAP from the drop-down menu.
1. Click the Configure button.
2. Specify a user name and password:
Select to Use Temporary User Name and Password by choosing the radio button:
21