Filter
Top Products
10
¾ Fallback IP address: Manually assign the IP address that the network is
using. The default IP is 192.168.2.1
¾ Fallback Subnet Mask: Assign the subnet mask to the IP address
¾ Fallback Gateway: Assign the network gateway for industrial switch. The
default gateway is 0.0.0.0.
¾ Management VLAN: ID of a configured VLAN (1-4094) through which you
can manage the switch. By default, all ports on the switch are members of
VLAN 1. However, if the management VLAN is changed, the management
station must be attached to a port belonging to this VLAN.
¾ Name: Type in the new user name (The default value is ‘admin’).
¾ Password: Type in the new password (The default value is ‘admin’).
¾ SNMP Enabled: Enables or disables SNMP on the switch. Supports SNMP
version 1and 2c management clients.
¾ SNMP Trap Destination: IP address of the trap manager to receive
notification messages from this switch. Traps indicating status changes are
issued by the switch to specified trap managers. You must specify trap
managers so that key events are reported by this switch to your
management station.
¾ SNMP Read Community: A community string that acts like a password and
permits access to the SNMP database on this switch. Authorized
management stations are only able to retrieve MIB objects.
¾ SNMP Trap Community: Community string sent with the notification
operation.
Ports
Port configuration ensures access to a switch port based on MAC address,
limits the total number of devices from using a switch port and protects
against MAC flooding attacks.
Port Configuration
In Port Configuration, you can set and view the operation mode for each port.
¾ Enable Jumbo Frames: This switch provides more efficient throughput for
large sequential data transfers by supporting jumbo frames on Gigabit
Ethernet ports up to 9216 bytes. Compared to standard Ethernet frames
that run only up to 1.5 KB, using jumbo frames significantly reduces the
per-packet overhead required to process protocol encapsulation fields.