Filter
Top Products
32
Figure 4-1
Factory Default
Forces the switch to restore the original factory settings. To reset the switch,
select “Reset to Factory Defaults” from the drop-down list and click Apply. The
LAN IP Address, Subnet Mask and Gateway IP Address will be reset to their
factory
Figure 4-2
Software upload
Select “Upgrade Firmware” from the Tools drop-down list then click on the
“Browse” button to select the firmware file. Click the APPLY button to upgrade
the selected switch firmware file. User can download firmware files for user’s
switch from the Support section of your local supplier.
Figure 4-3
Configuration File Transfer
Configuration file transfer allows you to save the switch’s current configuration
or restore a previously saved configuration back to the device. Configuration
files can be saved to any location on the web management station. To upload
the configuration file to save a configuration or "Download" to restore a
configuration. Use the Browse button to choose a file location on the web
management station, or to find a saved configuration file.