Filter
Top Products
23
5.7 Wireless Configuration
Wireless Configuration Double-click the “Wireless” button. Enter user name
and password then the wireless configuration window will popup. The default
username and password are ‘’admin’’ and ‘’1234’’, and you are into the steps of
‘’Infrastructure Mode”.
Function: You can select “Auto”, Enable” or “Disable” to manually configure
the wireless function.
Auto – “Auto” is the default setting of the MFP Server. At this mode, the MFP
Server will automatically decide to enable or disable the wireless function.
When the MFP Server starts up, it will auto-detect if the LAN port is connected
to an active network by an Ethernet cable. If this is the case, the MFP Server
will run in Ethernet mode. If the MFP Server is not connected to an active
network by Ethernet cable, the MFP Server will run in wireless LAN mode.
Users can plug the Ethernet cable into the MFP Server, after configuring the
MFP Server features and wireless settings; they can unplug the Ethernet cable
to enable the wireless connection. This makes the configuration much easier
without creating the wireless connection in advance.
Note: After you have set the wireless function, please remove the Ethernet
cable and then re-plug the power jack of the MFP Server to activate the