Filter
Top Products
24
wireless connection.
Enable – Enable wireless function only; the MFP Server’s wireless LAN will be
enabled and Ethernet will be disabled.
Disable – Disable the wireless function, the MFP Server’s wireless LAN will be
disabled and Ethernet will be enabled.
Infrastructure: You have to let the MFP server associate with an access point.
You can let the MFP server scan for an available access point automatically or
manually assign the SSID of the access point you want to use.
If you select to let the MFP server scan for an available access point, click
‘’Site Survey’’ the following window will pop up.
The table will list the available access points near the MFP server. Select an
access point in the list and click “OK”. If you cannot find the access point that
you want to use, click “Scan” to let the MFP server scan again.
You have to go through the following security setting procedure: