Filter
Top Products
66
You can configure the print server to automatically get IP
from DHCP server or manually specify static IP. The print
server also has a built-in DHCP server. You can enable
this DHCP server and let it manages IP for you.
Click the “IP” button to enter the IP setting page. If you
need the print server to automatically get an IP from
DHCP server, select “Auto IP”. You also can select “Static
IP” to manually assign “IP Address”, “Subnet Mask” and
“Gateway” for the print server.
Click the “DHCP Server” button to enter the DHCP
server’s setting page. You can “Enable/Disable” the DHCP
server or set “Auto” and assign a range of IP addresses
here. The DHCP server is disabled by default. If Auto is
selected, the DHCP Server of print server will be enabled
only when there is no other DHCP Server within the
network. When “Enable” or “Auto” is selected, you have
to configure “Starting Address”, “Range”, “Subnet Mask”,
“Gateway” and “DNS”. The print server will assign a
unique IP for each client.