Filter
Top Products
75
Users can plug the Ethernet cable to the print server at the first, after
configuring the print server features and wireless settings; they can
unplug the Ethernet cable to enable the wireless connection. It makes
the configuration much easier without creating the wireless
connection in advance.
Note: After you have set the wireless function, please remove
the Ethernet cable and then re-plug the power jack of the print
server to activate the wireless connection.
Enable – Enable wireless function only, the print server’s wireless
LAN will be always enabled and Ethernet will be always disabled.
Disable – Disable the wireless function, the print server’s wireless
LAN will be always disabled and Ethernet will be always enabled.
After selecting the operation modes of the wireless
function and setting the wireless function, click “Next” to
go to further detailed configuration.
Infrastructure Mode: