Edimax Technology Two-console 16 port PS/2 KVM Switch Switch User Manual


 
B. Use one end of 3-in-one Cable Kit to connect the daisy chain port of bank 1 and the
other end to the console port (white color block) of bank 2 KVM switch.
C. Please repeat item B to daisy chain more bank as you want. But, the maximum level of
daisy chain bank is eight.
D. While chaining the slave bank up to six banks, you need a VGA extender between the
fifth bank and the sixth bank to enhance the VGA signal.
(Note: If you would like to daisy chain 4 port, 8 port, and 16 port PS/2 or USB KVM Switch
together, the master bank must be 16 port PS/2 or USB KVM Switch)
Hot Plug
The KVM Switch supports “Hot Plug“ function for easy addition or removal of PCs. The user
can arrange or maintain PCs as follows:
a. A PC can be disconnected and reconnected to the same or different port of the KVM
unit without powering off as long as it is not the Daisy-chain port or pass through port.
b. To use hot plug function on PC which is powered on before connected to pass through
port, (i.e. the console port is connected to PC directly), please switch from the pass
through port to next port (or say emulation port ) and then switch back to the pass
through port.
c. You may unplug the mouse or the keyboard from the console port and plug it back in at
any time.