Edimax Technology Two-console 16 port PS/2 KVM Switch Switch User Manual


 
To press “ INS ” key for
editing PC name.
01 SYSTEM 01 02 SYSEM 02 (
BANK : 1
After finishing the edit, please press “ Enter “ key for saving information.
Use “ Tab “ key to select items like Bank, OSD, SCAN, CHANGE PASSWORD, CONSOLE
ON/OFF, etc…
a. The “OSD: 10 SEC” means
that PC system name exists
10 sec. on your monitor.
You can modify it from 05
sec to 99 sec. The factory
default value is 10 sec..
Please use “ Esc ” to
dismiss the OSD windows
display.
15 15SYSTEM 15 16 SYSTEM 16
OSD : 1 0 SEC. ( CHANGE PASSWORD
TAB : NEXT INSERT :EDIT
ESC : QUIT ENTER :COMPLETE
SCAN: 1 0 SEC. CONSOLE ON/OFF
b. The “ SCAN TIME” means that scan interval from one PC port to next PC port. The
default SCAN time is 10 sec and the maximum scan time is 99 sec. \
c. The “ CHANGE PASSWORD” is for user to avoid all PC systems to be intruded by the
other person. The default password is 8 digits “ 00000000 “.
There is an enter password window showed out when you select this item and then
press the Enter. The maximum password is eight digits. After you key in the password
and press the Enter key, there is another window for confirming your typed password.
You need to type the password again to check if your previous key-in password is
matched or not.
ESC : QUIT ENTER : COMPLETE
ENTER PASSWORD :
ESC : QUIT ENTER : COMPLETE
ENTER NEW PASSWORD :
ESC : QUIT ENTER : COMPLETE
RETYPE NEW PASSWORD :
ESC : QUIT ENTER : COMPLETE
NEW PASSWORD COMPLETE