Filter
Top Products
ELK-M1XEP Installation Manual
Page 17
10. Click the 'Thermostat' button to bring up the following screen. This begins with Thermostat 1, showing its current
temp, mode, fan setting, and the Heat and Cool setpoints. A drop down box permits additional thermostats to be
selected. Use the mouse to change any of the settings. The Up arrows raise the setpoint values and the Down
arrows lower the setpoint values.
11. Clicking the 'Temperature Probe' button displays the names and current temperatures of any connected M1ZTS or
M1ZTSR Zone Temperature Sensors.
9. Click the 'Climate' button to bring up the following screen which automatically populates itself with the names and
current temperatures of any installed keypads. It also has radio buttons along the top edge for switching between
screens for Thermostats and Temperature Probes. These screens also populate themselves with devices which
are programmed into the Control.