Elk M1XEP Switch User Manual


 
ELK-M1XEP Installation Manual
Page 4
Basics of Networking
WAN
LAN
The installer must have a basic understanding of Ethernet setup to install and configure the M1XEP. If you do not have
this basic knowledge, please seek the assistance of a network professional.
The
Internet
ISP
Cable
DSL
Satellite
Location
High Speed
Modem
Cable Modem
DSL Modem
Satellite Modem
Router with Built-In
Dynamic DNS Support
M1XEP
PC
Technical support from Elk
Products, Inc. is limited to the
setup and connection of the
M1XEP inside the local network.
Connection to outside the local network
may require assistance from others,
including the Internet service provider
and the network administrator.
If using a DSL modem, the modem may need to
be bridged to allow the IP address to be passed
to the router. Contact the manufacturer of the
modem for assistance.
Refer to section 6 of
the configuration and
setup on page 9.
Local Area Network
Wide Area Network