Filter
Top Products
Installation and start-up procedures 49
25A Switch Mode RectifierNT5C06B / C Installation and User Manual
Procedure 3 - Individual AC connection - side access old vintage
Step Action
1 Punch out 0.875-inch dia. knockout on left side of shelf.
2 Mount conduit connector with a lock nut.
3 Run and connect wires as illustrated.
4 Re-install the blank panel to prevent access to the connections inside.
–end–
Figure 16 - Embedded shelf (left view) - Individual AC - side access
Procedure 4 - Individual AC connection-side access
Step Action
1 Punch out the 0.875 in. dia. knockout on the left side of the shelf.
2 Mount the conduit connector with a lock nut.
3 Run and connect wires as illustrated.
4 Re-install the blank panel to prevent access to the connections inside.
–end–
L1 L2
L2L1
2
1
34