Filter
Top Products
Installation, Operation and Maintenance Manual 9 Liebert SPDs SL-22075 Rev 0, 9/2010
Surge Protective Devices
UNPACKING AND INSTALLATION
Unpacking and Preliminary Inspection
1. Inspect the shipping crate(s) for damage or signs of
mishandling before unpacking the unit.
2. Remove any securing bands and cardboard packing and
inspect the unit for any obvious shipping damages.
3. If any damage as a result of shipping is observed, immediately
file a claim with the shipping agency and forward a copy to
your local Liebert Sales Representative.
Handling Considerations
Larger units are bolted to a shipping pallet to facilitate handling
by forklift or pallet jack. Check the size and weight. Refer to
the cabinet data furnished with the unit.
Storage
The unit should be stored in a clean, dry environment.
Storage temperature range is -55ºC (-67ºF) to +85ºC
(+185ºF). Care should be taken to avoid condensation. All
packing and shipping materials should be left intact until
the unit is ready for final installation. If the unit has been
stored for an extended period of time, the unit should be
cleaned and carefully inspected before placing into service.
For optimum transient surge protection, coordinated surge
suppression should be applied at the service entrance and all
other electrical connections to the building (telephone, CATV,
etc.), at known surge generating loads within the building
(large motors, arc welders, switched capacitors, etc.), as well
as at sensitive electronic loads (such as computers, electronic
appliances, solid state motor drives, etc.). For interconnected
electronic loads (such as by way of data cabling), transient surge
suppression should also be applied to the interconnecting
wiring (data cables).
Environment — Unit is designed for operation indoors in
ambient temperatures of -40ºC (-40ºF) to +60ºC (+140ºF) with
a relative humidity of 0% to 95% (non-condensing).
The unit is provided in an industrial use enclosure, which is
dust-tight and drip-tight and should not be installed in areas
with excessive dust, corrosive vapors, flammable materials or
explosive atmospheres.
Audible Noise — The audible noise of the unit is less than
40 dB at 5 feet, which allows its placement within almost any
room if desired.
Service Clearances — Service clearance is needed for units with
hinged doors on the front that are capable of being opened.
Thirty-six inches (36 in/914 mm) minimum is recommended.
Mounting — Unit is intended to be wall mounted. Refer to
installation instructions for mounting dimensions and weight.
Warnings Defined —
Danger: Indicates an imminently
hazardous situation that, if not
avoided, will result in death or
serious injury. This signal word
is to be limited to the most
extreme situations.
Warning: Indicates a potentially
hazardous situation that, if not
avoided, could result in death or
serious injury.
Caution: Indicates a potentially
hazardous situation that, if not
avoided, may result in minor or
moderate injury. It may also be used
to alert against unsafe practices.
Surge Protective Devices
Installation, Operation and Maintenance Manual 2 Liebert SPDs SL-22075 Rev 0, 9/2010
LOCATION CONSIDERATIONS
Limited Warranty
This Warranty is given ONLY to purchasers who buy for commercial or industrial use in the ordinary course of each purchaser’s business.
General:
Liebert Corporation products and systems are in our opinion the finest available. We take pride in our products and are pleased that you have chosen
them. Under certain circumstances we offer with our products the following Ten Year Warranty Against Defects in Material and Workmanship.
Please read your Warranty carefully. This Warranty sets forth our responsibilities in the unlikely event of defect and tells you how to obtain
performance under this Warranty.
TEN YEAR LIMITED WARRANTY AGAINST DEFECTS IN MATERIAL AND WORKMANSHIP
LIEBERT PRODUCTS COVERED:
Liebert SH Series (Interceptor
®
)
Terms of Warranty:
As provided herein, the Liebert product is warranted to be free of defects in material and workmanship for a period of ten (10) years from the date
of product shipment from Liebert. The shipment date will be determined only from the Liebert bill of lading. If any part or portion of the Liebert
product fails to conform to the warranty within the warranty period, Liebert, at its option, will furnish new or factory remanufactured parts for
repair or replacement of that part or portion.
Warranty Extends to First Purchaser for Use, Non-transferable:
This Warranty is extended to the first person, firm, association or corporation for whom the Liebert product specified herein is originally installed
for use (the “User”) in the fifty United States (excluding territories) or Canada. This Warranty is not transferable or assignable without the prior
written permission of Liebert.
Assignment of Warranties:
Liebert assigns to User any warranties which are made by manufacturers and suppliers of components of the Liebert product and which are
assignable, but Liebert makes NO REPRESENTATIONS as to the effectiveness or extent of such warranties, assumes NO RESPONSIBILITY for any
matters which may be warranted by such manufacturers or suppliers and extends no coverage under this warranty to such components.
Drawings, Descriptions:
Liebert warrants for the period and on the terms of the Warranty set forth herein that the Liebert product will conform to the certified drawings, if any,
applicable thereto, to Liebert’s final invoices, and to applicable Liebert product brochures and manuals current as of the date of product shipment
(“Descriptions”). Liebert does not control the installation and use of any Liebert product. Accordingly, it is understood that the Descriptions are
NOT WARRANTIES OF PERFORMANCE and NOT WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE.
Obtaining Performance Under This Warranty:
Within a reasonable time, but in no case to exceed thirty (30) days, after User’s discovery of a defect, User shall contact Liebert at 1-800-LIEBERT
(543-2378) and request a return authorization number. User shall ship the product, with proof of purchase, to Liebert freight prepaid. Liebert
products shipped to Liebert without a return authorization number will be refused and returned freight collect to User at User’s expense. Liebert
products shipped by User to Liebert which have incurred freight damage due to User’s improper packaging of the product will not be covered by
this Warranty and any repairs or replacement parts, components or products needed will be invoiced in the full current price amount and returned
freight collect to User.
Subject to the limitations specified herein, Liebert will repair or replace, at its option, without charge for Liebert labor or materials, subsequent
to its inspection F.O.B. Liebert’s facility, the Liebert product warranted hereunder which does not conform to the Warranty. Replacement parts,
components or products shipped to User prior to Liebert’s receipt and inspection of the product claimed to be defective shall be invoiced in the
full current price amount and shipped freight collect F.O.B. Liebert’s facility. Warranty coverage will be extended only after Liebert’s receipt of
the claimed defective product within thirty (30) days of shipment of any replacement parts, components or products, if applicable, and only if
Liebert’s inspection discloses the claimed defect and the returned product shows no signs of treatment or use which would void the coverage of
this Warranty. All defective products and component parts replaced under this Warranty become the property of Liebert.
Warranty Performance of Component Manufacturers:
It is Liebert’s practice, consistent with its desire to remedy Warranty defects in the most prompt and effective manner possible, to cooperate
with and utilize the services of component manufacturers and their authorized representatives in the performance of work to correct defects
in the product components. Accordingly, Liebert may utilize third parties in the performance of Warranty work, including repair or replacement
hereunder, where, in Liebert’s opinion, such work can be performed in less time, with less expense, or in closer proximity to the Liebert product.