Filter
Top Products
ECB-1220R 11b/g Wireless Client Bridge/AP/Router/Repeater Version 1.1
14
4 Since this device is currently in Access Point mode, the AP radio button will be
selected by default.
5 Select the Bridge or Bridge Router radio button to and then click on the Apply
Change to switch the operation mode to Bridge.
6 Wait for about 1 minute and the device will automatically restart into Bridge
mode.
4 Access Point/Router Mode – Config
Logging In
To configure the AP through the web-browser, type IP address (default: 192.168.1.2)
into the address bar of the web-browser and press Enter.
Make sure that the ECB-1220R and your computers are on the same subnet. Refer
to Chapter 2 in order to configure the IP address of your computer.
Username：admin; Password：admin