Filter
Top Products
ECB-1220R 11b/g Wireless Client Bridge/AP/Router/Repeater Version 1.1
26
Click on the Save button to save the current settings to a file on the local disk.
Click on the Browse button to select the settings file and then click on the Upload
button to load the previously saved settings.
Click on the Reset button to reset the device to its factory default settings. Click
Restart to reboot the device.
Password
Click on the Password link under the Management menu. This option allows you to
create a user name and password for the device. By default, this device is configured
without a user name and password. For security reasons it is highly recommended
that you create a user name and password.
Enter a user name into the first field.
Enter a password into the New Password field and then re-type the password into
the Confirmed Password field. Then click on the Apply Changes button.
By clicking on the Reset button, the user name and password fields will become
blank indicating that the username and password has been disabled.
TCP/IP Settings
Click on the TCP/IP Settings link on the
navigation drop-down menu. You will then see
the LAN Interface and SNMP option. The
options are described in detail below.