EnGenius Technologies ECB-1220R Network Router User Manual


 
ECB-1220R 11b/g Wireless Client Bridge/AP/Router/Repeater Version 1.1
31
(Router mode)
Username / Password & Connection type (PPPoE) should be input then click on the
Connect button.
Address Mode: PPPoE can be used with a dynamic or static IP address. If you
select the Dynamic IP radio button, then the IIP address in the next field is not
required.
However, if you select the Static IP radio button, then the IP address in the next field
is required.
User Name: Specify the user name which is provided by your ISP.
Password: Specify the password which is provided by your ISP, and then verify it
once again in the next field.
PPTP (Point-to-Point Tunneling Protocol) (Router mode)
The WAN interface can be configured as PPTP. PPTP (Point to Point Tunneling
Protocol) uses a virtual private network to connect to your ISP. This method of
connection is primarily used in Europe. This method of connection requires you to