EnGenius Technologies ECB-1220R Network Router User Manual


 
ECB-1220R 11b/g Wireless Client Bridge/AP/Router/Repeater Version 1.1
24
referred when an unknown error occurs on the system or when a report needs to be
sent to the technical support department for debugging purposes.
In order for the log to record all the events, you must first place a check in the Enable
Log or Enable Remote Log (Log Server required) check box.
Select system all or wireless depending on the type of events you want recorded.
Since the log is not dynamic, you must click on the Refresh button for the most
recent events, or click on the Clear button to clear the log.
Upgrade Firmware
Click on the Upgrade Firmware link under the Management menu. This page is
used to upgrade the firmware on the device. Make sure that downloaded the
appropriate firmware from your vendor.