Support User Manuals

Enterasys Networks 4H4285-49 Switch User Manual

Open as PDF

of 90

Gaining Access to Memory Modules

Matrix DFE-Gold Series PoE Module Hardware Installation Guide B-11

Installing the DIMM

ToinstallaDIMM,refertoFigure B‐8 andproceedasfollows:

1. InserttheDIMMdownbetweentheconnectorfingers.

2. PivottheDIMMdownwardsothetabsontheconnectorarmsalignwiththetwo

alignmentnotches.Withthetwoconnectorarmsspreadoutward,pushtheDIMM

downbetweentheconnectorarms.

Thenreleasethetwoconnectorarmstolockthe

DIMMintoplace.

3. Reinstallthesafetycover.Referto“ReinstallingtheSafetyCover”onpage B‐13for

instructions.

Figure B-8 Installing the DIMM

Caution: Observe all Electrostatic Discharge (ESD) precautions when handling sensitive

electronic equipment.

Precaución: Al trabajar con equipos electrónicos sensibles, tome todas las precauciones

de seguridad para evitar descargas de electricidad estática.

1 DIMM 3 Connector arms

2 Connector fingers 4 Alignment notches (2)

À

Á

Â

Ã

Ã

Â

previous next