Filter
Top Products
50 CHAPTER 3: CONFIGURING THE ETHERNET ADAPTER
Viewing System
Summary
Under System Summary, you can view the following information:
Click Refresh to update the information.
Table 14 System Summary Page
Property Description Default Value
Device Name The name assigned to the Ethernet Adapter.
You can change the default name to one of
your choice by clicking System Properties
under System Configuration.
RoamAbout
Ethernet
Adapter -
RBTSA
Device Location If you use the default device name, entering
the location is optional.
None
Country Code The Country Code determines the available
channels and transmission power level
based on regulatory restrictions in the
county where the Ethernet Adapter is
installed.
Varies
Transmit Power The level of transmission power (100%,
50%, 25%, 12%, or Min).
You can change this setting by clicking
Wireless Network under System Configuration.
100%
MAC Address The MAC address of the Ethernet Adapter. N/A
Serial Number The serial number of the Ethernet Adapter. Varies
Firmware Version The version of firmware the Ethernet
Adapter is currently using.
N/A
DHCP Client Determines if the Ethernet Adapter obtains
its IP address from the DHCP server on the
network.
On
IP Address The IP address of the Ethernet Adapter. You
can change this address by clicking IP
Network under System Configuration.
Varies
Subnet Mask The subnet mask address of the Ethernet
Adapter. You can change this address by
clicking IP Network under System
Configuration.
Varies
Data Preamble The data preamble setting (Short [Enhanced
performance] or Long [Wi-Fi Interoperable]).
To change this setting, click Wireless
Network under System Configuration.
Long
System Up Time The elapsed time since the Ethernet Adapter
booted up.
Day 0, 0:00:00
Date Manufactured The date the Ethernet Adapter was
manufactured.
N/A