Filter
Top Products
General Configuration Screen
4-14 Device Configuration Menu Screens
Figure 4-5 COM Port Warning
3. Use the arrow keys to highlight YES. Press ENTER.
4. If the port was ENABLED, the message “SAVED OK” appears, and the edits are saved. If the
port was DISABLED, use the arrow keys to highlight SAVE at the bottom of the screen, then
press ENTER.
4.2.10.1 Changing the COM Port Application
After enabling the COM port as described in Section 4.2.10, one of the applications supported by
the COM port (LM or UPS) can be selected. The default application is LM.
To change the COM port application:
1. Use the arrow keys to highlight the Application field.
2. Use the SPACE bar or BACKSPACE key to step to the desired setting. Table 4-3 lists the
available settings and their corresponding applications.
NOTE: Exiting without saving causes the message “NOT SAVED -- PRESS SAVE TO
KEEP CHANGES” to appear. Exiting without saving causes all edits to be lost.
WARNING
30691_12
THE COM PORT HAS BEEN RECONFIGURED AND THERE IS NO IP
ADDRESS SET FOR THIS DEVICE. YOU WILL NO LONGER BE ABLE
TO MANAGE THIS BOARD. DO YOU STILL WISH TO RECONFIGURE
THIS COM PORT?
YES
NO