Filter
Top Products
Quick VLAN Walkthrough
VLAN Operation and Network Applications 12-19
Figure 12-8 Walkthrough Stage Three, Port 10 Egress Setting
Configuring the Port Parameters
Now that the TEST VLAN and the trunk connection are set up, we can proceed to set the port
parameters for ports 3 and 10, as follows:
1. On the 802.1Q Configuration Menu screen, use the arrow keys to highlight the
VLAN PORT CONFIGURATION menu item and press ENTER. The VLAN Port
Configuration screen, Figure 12-9, displays.
2. Use the arrow keys to highlight the PVID field for Port 3.
3. Type in 2, which is the VLAN ID of the Test VLAN. This will associate Port 3 with the
VLAN ID, thus making the port PVID of 2.
4. Use the arrow keys to highlight the Acceptable Frame Types field for Port 3.
5. Use the SPACE bar to step to ADMIT ALL FRAMES.
6. Leave the INGRESS FILTERING field for Port 3 in the default setting of DISABLED. This
prevents frames from being filtered out according to the Port VLAN List.
NOTE: Since Port 3 will connect to a single workstation, and is not to be used for
switch-to-switch communications, the acceptable frame types allowed through this port
will be all frame types (tagged and untagged). Since Port 3 will not receive VLAN frames
from the work station, it is not necessary to filter frames.
30691_65
RETURN
EXIT
Port Egress
---- ----------
1 [ NO ]
2 [ NO ]
3 [UNTAGGED ]
4 [ NO ]
5 [ NO ]
6 [ NO ]
7 [ NO ]
8 [ NO ]
SAVE
SET ALL PORTS: [UNTAGGED]
Port Egress
---- ----------
9 [ NO ]
10 [ TAGGED ]
11 [ NO ]
12 [ NO ]
13 [ NO ]
14 [ NO ]
15 [ NO ]
16 [ NO ]
Port Egress
---- ----------
17 [ NO ]
18 [ NO ]
19 [ NO ]
20 [ NO ]
21 [ NO ]
22 [ NO ]
23 [ NO ]
24 [ NO ]
Port Egress
---- ----------
25 [ NO ]
26 [ NO ]
27 [ NO ]
VLAN ID: 2 FDB ID: 2 VLAN NAME: Test