Filter
Top Products
Protocol Port Configuration Screen
8-32 802.1p Configuration Menu Screens
4. After the lines are marked, use the arrow keys to highlight the DEL MARKED command field.
5. Press ENTER. The marked line items are deleted and the DEL MARKED command is changed
back to DEL ALL.
8.7 PROTOCOL PORT CONFIGURATION SCREEN
When to Use
To display the ports associated with the line item (Classification Rule) selected in the Priority
Classification Configuration screen described in Section 8.6. Each port can be changed so it will or
will not transmit frames according to the Classification Rule.
How to Access
Use the arrow keys to highlight the line of interest (Classification Rule) under the Priority/Protocol
Type/Configured Ports columns on the Priority Classification Configuration screen and press
ENTER. The Protocol Port Configuration screen, Figure 8-8, displays. The Classification Rule
used to access this screen is displayed in the Classification Rule field shown in Figure 8-8.
Screen Example
Figure 8-8 Protocol Port Configuration Screen
30691_47
RETURN
EXITSAVE PREVIOUS
1 Ether II Type 0x0800 (DOD IP)
Port Classify Port Classify Port Classify Port Classify
1 [NO ] 9 [NO ] 17 [NO ] 25 [NO ]
2 [NO ] 10 [NO ] 18 [NO ] 26 [NO ]
3 [NO ] 11 [NO ] 19 [NO ] 27 [NO ]
4 [NO ] 12 [NO ] 20 [NO ] 28 [NO ]
5 [NO ] 13 [NO ] 21 [NO ] 29 [NO ]
6 [NO ] 14 [NO ] 22 NO 30 [NO ]
7 [NO ] 15 [NO ] 23 [NO ] 31 [NO ]
8 [NO ] 16 [NO ] 24 [NO ] 32 [NO ]
SET ALL PORTS: [NO ]
Classification Rule Field
NEXT