Filter
Top Products
Using the EPSON TWAIN Utilities Page 55
6 Click and drag the slider box or click the left or right slider arrows until
the shades of the gray stripes match as closely as possible.
7 Click OK. The profile is saved as the Screen Destination setting in
EPSON TWAIN.
8 Click OK at all the open windows to close them and return to the
Control Panel.
Calibrating the Macintosh Screen
Follow these steps to calibrate your screen:
1 Open the EPSON Scanner folder and select EPSON Screen
Calibration. You see the following dialog box:
2 Click and drag the slider box or click the left or right slider arrows until
the shades of the gray stripes match as closely as possible.
3 Click OK. The profile is saved as the Screen Destination setting in
EPSON TWAIN.
View the screen from
a short distance when
you calibrate it. The
gray stripes won’t
blend perfectly
together; however,
try to make them
match as closely as
possible.
before calibration after calibration