Filter
Top Products
Trouble Shooting47
HP289
8.1 Error Codes
The instrument has extensive self test facilities and will display an error
code if it detects an invalid condition. If the instrument displays an
error code other than those listed below, please contact the factory.
Error codes are displayed as "Err ##" and a list of the commonly
encountered codes are given below:
Input Errors
11 Invalid input configuration programmed.
13 Signal Timeout (see Section 3.2.2).
14 Communications Input error (RS232/422/485 interface).
Output Errors
21 Invalid output configuration.
22 Communications error - Baud rate not set.
23 Communications error - Printer fault.
Configuration Errors
30 Zero Value not allowed.
33 Invalid Printer Type.
34 Invalid Volume Units selected.
.