Epson 3 Plus Printer User Manual


 
Custom
4.13” (105mm) x 1.00” (25.4mm) minimum
8.6” (218.5mm) x 27 feet (8.23 m) (at 200
dpi) max.
8.6” (218.5mm) x 18 feet (5.49 m) (at 300
dpi) max.
(14” (355.6 mm) maximum length
recommended)
Paper Type Thermal—Cut Sheet, Roll Paper,
Perforated Roll, or Fanfold Paper
Paper Loading Manual—Single Sheet or Roll
Form Feed Modes No Feed Mode
Fixed Page Mode
End of Page Mode
Interfaces
USB Printer: USB “Mini-B”
(Using USB 1.1 “High Speed”)
Host: USB “A”
IrDA Tiny TP extension to IrLMP, IrCOMM
(COM port emulation using 3 wire “cooked”
serial mode [IrLPT]), and IrOBEX, vCard,
vCal and vMSG (text portions only).
Bluetooth 2402~2480MHz ISM band, 79 x 1MHz,
SPP Protocol, Pairing/PIN supported.
Factory default = PIN disabled.
Environmental
Temperature Operating: 14º to 113º F (-10º to 45º C)
Note: Operation at low temperatures may
slow the printer or cause it not to print at all.
Storage: 5º to 122º F (-15º to +50º C)
Humidity Operating: 30-80% RH, non-condensing
Storage: 30-85% RH, non-condensing
Page 64