Filter
Top Products
ADVANCED CMOS SETUP options (continued)
Option
Function
System Boot Up
Specifies the order in which the computer checks the
Sequence
drives when looking for the operating system; the
default (C:, A:) loads the operating system from drive
C; if you want to load the operating system from
diskette, change this setting to A:, C:
Password Enables or disables password security; select
Checking
Always to enable password checking whenever the
Option computer is turned on or reset; select Setup to enable
password checking only when you start the Setup
program; if you enable this option, you then select the
CHANGE PASSWORD option to specify your password
Video BIOS Enables or disables shadow RAM for the video BIOS; if
Shadow you enable this feature, the system copies the
E000,64K
contents of its video BIOS into RAM so it can perform
certain operations faster
LCD Contrast
Enables or disables the LCD contrast enhancement
Enhancement
feature; to enable this feature, you can specify
foreground, background, or both
Full Height Enables or disables a full height cursor; the normal
Cursor
cursor is an underscore _; the full height cursor is a
rectangle
Internal cache Enables or disables the 1 KB internal memory cache
memory
built into the microprocessor; when the cache is
enabled, the system performs most efficiently
Non-cacheable Enables or disables a non-cache block of memory;
Block 1 Size your computer automatically caches all system
memory unless you enable a non-cache block of
memory
Non-cacheable Displays the starting address of the non-cache block of
Block 1 Addr memory
Non-cacheable
Enables or disables a non-cache block of memory;
Block 2 Size
your computer automatically caches all system
memory unless you enable a non-cache block of
memory
Non-cacheable Displays the starting address of the non-cache block of
Block 2 Addr memory
Running Setup 5-9