Filter
Top Products
Note:
If you’re setting up your
computer for the first
time, you may see a
message asking if you
want to add a printer.
Select Cancel and
then complete your
Windows 95 setup. You
will be prompted to restart
Windows to save your
new settings. If you then
see the New Hardware
Found screen, follow the
instructions on this page
to set up your printer
software. If you don’t see
the screen, follow the
instructions under “While
Running Windows 95” on
page 11.
If your computer is on
a network and you
connected the printer to a
remote server, you need
to set up the printer for
network use after
installing the printer
software. See Chapter 4
of your
User’s Guide
for
instructions.
10
Windows 95 Plug and Play
1. Turn on the printer first, then your computer.
2. If the New Hardware Found screen appears, make sure
your printer name is displayed and the Driver from disk
provided by hardware manufacturer button is selected.
Then click OK. (If you don’t see the New Hardware Found
screen, skip to “While Running Windows 95” on page 11.)
3. Insert the EPSON printer software CD-ROM (or diskette 1, if
you created diskettes) in your drive.
4. Type D:\WINDOWS or A:\ (or the correct drive letter), and
click OK.
5. At the next screen, keep or change the printer model name.
If you are prompted to use your printer as the Windows
default printer, select Yes.
6. Click Finish and then follow the instructions on the screen
to install the software.
The installer creates an EPSON folder for your printer software
icons and adds an icon for your printer to the Printers folder. If
you installed your printer software from the CD-ROM, EPSON
Answers opens automatically.
Quick Setup 5/22/97, 11:37 AM10