Epson 710/700/500 Projector User Manual


 
■ ■ ■ ■
4
Setting Up the Projector
1. Place the projector on a sturdy, level surface within five
feet of the computer or video source.
Caution:
Do not hold the projector by the lens. This can damage
the lens.
2. Place the projector at a correct distance from the screen.
The distance between the projector and the screen
determines the actual image size. Use the general
guidelines below to determine the correct distance.
3. Turn the projector so that the lens is at right angles to the
screen. If the projector is not angled correctly, the screen
image will be crooked.
4. Connect one end of the power cable to the projector’s
power connector. Connect the other end to an earthed
electrical socket.
The projector should be in sleep mode, indicated by an
orange power indicator.
Warning:
Never look into the lens when the projector is on.
There is a risk that the projector might come on suddenly even
though it is not in use. The light from the lamp can damage your
eyes. It is especially important that children should not be
allowed to look into the lens.
Screen size Horizontal distance from projector to screen
300 inches (610x460cm) 450.7 inches (11.5m) ~ 546.3 inches (13.8m)
200 inches (410x300cm) 299.5 inches (7.7m) ~ 363.3 inches (9.2m)
150 inches (305x228cm) 223.9 inches (5.7m) ~ 271.7 inches (6.9m)
100 inches (200x150cm) 148.3 inches (3.8m) ~ 180.2 inches (4.5m)
80 inches (160x120cm) 118.1 inches (3.0m) ~ 143.6 inches (3.6m)
60 inches (120x90cm) 87.8 inches (2.3m) ~ 107.0 inches (2.7m)
40 inches (81x61cm) 57.6 inches (1.5m) ~ 70.4 inches (1.7m)
30 inches (61x46cm) 42.5 inches (1.1m) ~ 52.1 inches (1.3m)
26 inches (53x40cm) ~ 44.7 inches (1.1m)