Filter
Top Products
40
Maintenance
Seychelles
short.bk Rev. C
A5 size MAINT.FM
2/5/99 Pass 2
L
Proof Sign-off:
K. Nishi _______
N.Nomoto _______
K.Norum _______
3. Follow the messages on your screen.
For Macintosh users
1. Click the Utility icon button in the Print dialog box. Then click
the
Head Cleaning
button.
2. Follow the on-screen messages.
Using the control panel buttons
1. Make sure that the
P
power light is on and that both the
B
and
A
ink out lights are off.
Note:
If the
B
or
A
ink out light is flashing or on, you cannot clean the
head, and this operation will start the ink cartridge replacement
procedure. If you do not want to replace an ink cartridge at this
moment, press the
R
cleaning button to return the print head to
its home position.
2. Hold down the
R
cleaning button for three seconds.
The printer starts cleaning the print head and the
P
power
light begins flashing. Print head cleaning takes about one
minute to complete.
c
Caution:
Never turn off the printer while the
P
power light is flashing.
Doing so may damage the printer.
3. When the
P
power light stops flashing, print a few lines from
a document to confirm that the head is clean and to reset the
cleaning cycle.
If print quality hasn’t improved after repeating this procedure
four or five times, turn the printer off and leave it alone overnight.
Then do the head cleaning again.