Filter
Top Products
Messages Description Action
Mem Overflow The printer doesn’t have enough Press the Continue button on the control panel.
memory available for the current If the message remains, reset the printer by
print job. holding down the Alt and Reset buttons.
If the same message appears when you try
printing again, you may need to reduce the
number or size of graphics or fonts, lower the
resolution, or add memory to your printer.
Replace Oil Roll The fuser oil roll is empty. Replace the fuser oil roll (see page 4).
Replace Photocondctr The photoconductor unit has reached Replace the photoconductor unit (see page 2).
the end of its service life.
Replace Waste T Box The waste toner collector is full. Replace the waste toner collector (see page 3).
Error message list (continued)
10
Messages Description Action
<
CMYK
> Toner Out The indicated toner cartridge is empty. Replace the indicated toner cartridge (see page 1).
Service req e A controller error or a print engine Write down the error number and turn off the
<error number> error has been detected. printer. Wait at least 10 seconds and then turn it
back on. If this error still appears, turn off the
printer, unplug the power cord, and contact
your dealer.
Error message list (continued)