Filter
Top Products
Replacing the Fuser Oil Roll
Replacing the Fuser Oil Roll
1 Lower the face-up tray, if necessary. Then pull the fuser
unit all the way out.
Be careful not to touch the fuser—marked
CAUTION! HIGH TEMPERATURE—or the
adjoining areas. If you’ve used the printer
recently, the fuser and the area around it can be
very hot.
2 Grab the handle of the fuser oil roll and remove it.
Do not dispose of the used oil roll in fire; it can
explode and cause injury.
3 Take a new fuser oil roll (S052002) out of its box and
remove the cover and shipping pins, as shown.
4 Hold the roll handle and insert it into the fuser unit,
matching the green marks on the roll and unit.
5 Push the roll down firmly until it clicks into place.
6 Slide the fuser unit back into the printer.
fuser unit
4
face-up
tray
fuser oil roll
Fuser Oil Roll S052002
handle
positioning marks