Filter
Top Products
EPSON Stylus PHOTO 810/820/830 Revision B
Troubleshooting Unit Level Troubleshooting 78
Power on
Anywhere
The printer does not perform the ink
replacement CL and the error is
indicated with LEDs and STM3.
Ink cartridge
1. Check if ink cartridge can be used by install it to other
printer.
1. Replace the ink cartridge with brand-new
one.
The printer does not perform the printing
operation and the error is indicated with
LEDs and STM3.
Ink cartridge
1. Check if the ink is remaining in the I/C.
2. Check if the ink cartridge can be used by install it to other
printer.
1. Replace the ink cartridge with brand-new
one.
2. Replace the ink cartridge with brand-new
one.
Table 3-14. Multiple papers are always loaded without LEDs and STM3
Error condition
LED indication
STM3 message
Occurrence
timing
CR position at the
power on timing
Unit/Part name Possible cause Check table
Multiple papers
are always loaded
Power : -
Error : -
No appear
Operation - ASF unit The Tension spring 29.1 comes off. Refer to Table 3-15
Table 3-15. Check point for multiple papers are always loaded without LEDs and STM3
Occurrence
timing
CR position
Detailed phenomenon
Defective
unit/part name
Check point Remedy
Operation
-
Any error condition is not indicated with
the LEDs and STM3. But, multiple
papers are always loaded from ASF unit.
ASF unit
1. Check if the Paper return plate operates correctly in the
paper loading sequence.
1. Reassemble the Tension spring 29.1 between
the ASF frame and the Paper return plate.
Table 3-13. Check point for the error before the initial ink charge according to each phenomenon
Occurrence
timing
CR position
Detailed phenomenon
Defective
unit/part name
Check point Remedy
Torsion spring 29.1