Filter
Top Products
Image Menu
Items that can be set vary depending on the image signal and Source currently being projected as shown in the following screen shots. Setting details
are saved for each image signal and Source.
Depending on the model used, some input sources are not supported.
s
p.16
Computer Signal/USB /USB Display/LAN
Component Video
g
/Composite video
g
/S-Video
g
Sub Menu Function
Color Mode
You can select the quality of the image to suit your surroundings. s p.18
Brightness
You can adjust the image Brightness.
Contrast
g
You can adjust the difference between light and shade in the images.
Color Saturation
You can adjust the Color Saturation for the images.
Tint
(Adjustment is only possible when NTSC signals are being input if you use composite video/S-Video.)
You can adjust the image Tint.
Sharpness
You can adjust the image sharpness.
Color Adjustment
You can make adjustments by choosing one of the following.(This item cannot be selected if
sRGB
g
is selected as the Color Mode setting from the
Image menu.)
Abs. Color Temp.: You can adjust the overall tint of the image. You can adjust tints in 10 stages from 5000 K to 10000 K. When a high value is
selected the image becomes tinged with blue, when a low value is selected the image becomes tinged with red.
Red, Green, Blue: You can adjust the saturation of each color individually.
Auto Iris
(This item is only displayed if Dynamic or Theatre are selected as the Color Mode setting from the Image menu.)
Set whether or not (On/Off) to adjust to the optimum light status for images being projected. s p.19
List of Functions
35