Filter
Top Products
Sub Menu Function
Progressive
(Component Video can only be adjusted when 480i/576i/1080i signals are being input)
Off: IP conversion is carried out for each field in the screen. This is ideal for viewing images with a large amount of movement.
On:
Interlace
g
(i) signal is converted to Progressive
g
(p). Applies to still images.
Noise Reduction
Smoothes out rough images. There are two modes. Select your favorite setting. It is recommended that this is set to Off when viewing image
sources in which noise is very low, such as for DVDs.
Input Signal
You can select an input signal from Computer1/2 input port.
If set to Auto the input signal is set automatically according to the connected equipment.
If colors do not appear correctly when set to Auto, select the appropriate signal according to the connected equipment.
Video Signal
You can select input signal from Video input port. If set to Auto, video signals are recognized automatically. If interference appears in the image or
a problem occurs such as no image is being projected when set to Auto, select the appropriate signal according to the connected equipment.
Aspect
You can set the
Aspect Ratio
g
for projected images. s p.20
Reset
You can reset all adjustment values on the Signal menu to their default settings, except for Input Signal.
To return all menu items to their default settings, see s p.52
Settings Menu
Sub Menu Function
Keystone
You can correct keystone distortion in the vertical directions. s Quick Start Guide
Auto Keystone
Turn On to perform Auto Keystone.
(Auto Keystone is only executed when Front is selected from the Extended - Projection menu.)
List of Functions
37