Filter
Top Products
Wireless LAN Menu (EB-826W/825/85 only)
Settings are enabled when the optional Wireless LAN unit is installed.
Sub Menu Function
Connection mode
Use EMP NS Connection to set the mode, how the computer connect to the projector.
Set to Quick Connection Mode when you want to make a quick wireless connection. Set to Advanced Connection Mode when you want to
connect to a network system via an access point.
Wireless LAN system
Sets the Wireless LAN system.
SSID
g
Enter an SSID. When an SSID is provided for the Wireless LAN system in which the projector participates, enter the SSID.
You can enter up to 32 single-byte alphanumeric characters.
IP Settings
You can make settings related to the following addresses.
DHCP
g
: Select whether or not (On/Off) to use DHCP. If this is set to On you cannot set any more addresses.
IP Address
g
: You can input the IP Address assigned to the projector. You can input a number from 0 to 255 in each field of the address. However,
the following IP Addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
Subnet Mask
g
: You can input the Subnet Mask for the projector. You can input a number from
0
to
255
in each field of the address. However, the
following Subnet Masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway Address
g
: You can input the IP Address for the gateway for the projector. You can input a number from 0 to 255 in each field of the
address. However, the following Gateway Addresses cannot be used.
0.0.0.0
,
127.x.x.x
,
224.0.0.0
to
255.255.255.255
(where
x
is a number from
0
to
255
)
SSID Display
To prevent the SSID from being displayed on Network Info in the Network Menu and on the LAN Standby screen, set this to Off.
List of Functions
44