Filter
Top Products
Making Detailed Adjustments 43
Selecting Memory Settings
You can easily recall the memory settings by using the
memory button on the remote control.
1. Press the
Memory button on the remote control.
2. Select
Load Memory.
3. Use the arrow buttons to select the desired setting, then
press the
Enter button.
After a moment, the image appears on the screen using
the retrieved settings. Certain settings may not be
applied, depending on the input signal.
Creating Memory Settings
Memory settings can be used to store most of the picture quality settings on page 37 and color
settings on page 39. Before saving them to memory, adjust the settings to the desired levels.
1. Press the
Memory button on the remote control.
2. Select
Save Memory.
3. Select the memory name you want to use, then press the
Enter button to save your
settings.
Note: Saved settings are indicated by a green highlight next to the memory name. If you select
a name that is already in use, the existing settings will be erased and new ones saved in their
place.
Renaming Memory Settings
With the Pro Cinema 9500 UB, you can rename memory settings so that they are easier for
you to recognize.
1. Press the
Memory button on the remote control.
2. Select
Rename Memory.
3. Select the memory name you want to change, then press the
Enter button. The name
selection screen is displayed.
4. Do one of the following:
■ To select a name from the displayed preset names, select the desired name and press
the
Enter button.
Memory
button