Filter
Top Products
PictureMate Snap (PM 240)
2 - PictureMate Snap (PM 240) 8/06
Mechanical
Electrical
Note: Check the label on the bottom of PictureMate for voltage
information.
AC Adapter
Environmental
Memory Card Slots
Computer USB Interface
External Device Interface
* Not all USB devices are supported.
Safety Approvals
Paper path Sheet feeder, top entry
Sheet feeder capacity 20 sheets
Dimensions Storage
Width: 8.5 inches (215 mm)
Depth: 6.0 inches (152 mm)
Height: 5.7 inches (145 mm)
Printing
(with paper support and output tray open)
Width: 8.5 inches (215 mm)
Depth: 13.3 inches (339 mm)
Height: 10.3 inches (261 mm)
Weight 5.3 lb (2.4 kg) without photo cartridge,
AC adapter, or optional battery
Printable area Border printing: 0.12 inch (3 mm) margin on
all sides of the paper
Borderless printing: no margins
Input voltage range 110 to 120 V or 220 to 240 V
Power consumption (approximate)
Printing 19.0 W
Sleep mode 4.0 W
Powered off 0.4 W
Model A381H
Rated voltage AC 100 to 240 V
Input voltage range AC 90 to 264 V
Rated frequency 50 to 60 Hz
Input frequency range 49.5 to 60.5 Hz
Rated current 0.4 to 0.8 A
Rated electrical power 42 W
Output 20 VDC, 1.68 A
Temperature Operation: 50 to 95 °F (10 to 35 °C)
Storage: –4 to 140 °F (–20 to 60 °C)
1 month at 104 °F (40 °C)
Humidity Operation: 20 to 80% RH
Storage (in shipping container): 5 to 85% RH (without
condensation)
Card slots CF Type II card slot Compatible with “CF+ and
CompactFlash
™
Specification 2.0”
Sony Memory Stick
®
/
MemoryStick PRO
™
/
Duo (requires adapter)
card slot
Compatible with “Memory
Stick Standard version
1.40-00”
Compatible with “Memory
Stick Standard Memory
Stick PRO Format
Specifications version
1.01-00”
SD
™
(Secure Digital)/
MMC
™
(MultiMediaCard
™
) card
slot
Compatible with “SD
Memory Card Specifications
/ PART1. Physical Layer
Specification Version 2.0”
Compatible with
“MultiMediaCard System
Specifications Version 3.31
cards”
xD-Picture Card
™
slot Compatible with
“xD-Picture Card Card
Specification Version 1.20
Type M Card/Type H Card”
Voltage
requirements
3.3 V
3.3 V/5 V combined use
Maximum current is 500 mA
Connectivity Universal Serial Bus Specifications Revision 2.0
Universal Serial Bus Specifications Revision 1.1
Bit rate 480 Mbps (High speed device)
Connector type USB Series B
Data Encoding NRZI
Recommended
cable length
Less than 6 feet (1.8 meters)
Connectivity Universal Serial Bus Specifications Revision 2.0*
Bit rate 480 Mbps (High speed device)
Connector type USB Series A
Data Encoding NRZI
Recommended
cable length
Less than 6 feet (1.8 meters)
Safety UL 60950-1
CSA C22.2 No. 60950-1
EMC FCC part 15 Subpart B class B
CSA C108.8 Class B