Filter
Top Products
PictureMate Snap (PM 240)
8/06 PictureMate Snap (PM 240) - 7
Printing a Range of Photos
You can choose a range (or sequence) of consecutive photos
from your camera’s memory card (for example, photos 7
through 12).
1. After inserting a card, press
Menu.
2. Press or to highlight
Select, then press OK.
3. Press or to highlight
Select Range, then press OK.
4. Highlight the first photo in the range, then press
OK. (You
can use , , , or to select the photo.)
5. Highlight the last photo in the range, then press
OK.
The selected photos are highlighted orange:
6. Press
Proceed.
7. To change the number of copies of a single photo, press
or to select the photo. Then press
OK to increase the
number, or
Copy - to decrease it.
8. To preview your photos, press
Print Preview. (Or skip
directly to step 10 to print your photos.)
Press or to review your selected photos. If you change
your mind, press
Back.
9. Press
Layout to select the layout of your photos on the
paper. (For more information, see page 8.)
10. Make sure you have enough paper loaded, then press
Print to start printing.
Printing Photos By Date
You can print photos taken on specific dates. If you have a lot
of photos on your memory card, this makes it easier to find
the ones you want.
1. After inserting a card, press
Menu.
2. Press or to highlight
Select, then press OK.
3. Press or to highlight
Select By Date, then press OK.
You see a list of dates.
4. Press or to highlight the date you want, then press
OK.
A checkmark appears in the box for the date you selected.
You can select additional dates, if desired.
5. After selecting all the dates you want, press
Proceed (the
right selection button under the photo viewer screen).
The photos taken on the selected date(s) appear on the
screen.
6. Press
OK to select the current photo for printing. Or you
can print all photos or a range of photos (as described on
page 6).
7. Make sure you have enough paper loaded, then press
Print to start printing.
Printing Camera-Selected DPOF Photos
If your camera supports DPOF (Digital Print Order Format),
you can use it to pre-select which photos and how many
copies you want to print.
See your camera’s manual to choose photos for printing with
DPOF, then insert your memory card in PictureMate.
PictureMate automatically reads your pre-selected photos and
displays the message
DPOF data was found. Use the DPOF
data?
1. Select Yes (using the right selection button under the photo
viewer screen).
Your photos are previewed on the screen. Press or to
review your selected photos
2. Make sure you have enough paper loaded, then press
Print to print your pre-selected photos.