Filter
Top Products
Sawgrass Technologies, Inc. SubliJet IQ
®
Getting Started Guide for the EPSON Stylus D88
25
2. Install the Epson printer driver and verify printer operation.
3. Insert the PowerDriver IQ CD into the CDROM drive on the
computer and install PowerDriver IQ.
Step By Step Installation
To get started printing as soon as possible, these are the steps
Sawgrass recommends you perform while setting up your sublimation
printer driver software.
1. Setup the printer according to the Epson instructions.
2. Install Epson OEM inks.
3. Install the Epson printer driver. According to the Epson user’s
manual.
4. After the Epson driver is installed, check to see which port the
printer is set to:
a. In XP you can do this by clicking on Start, Printers and Faxes.
For XP with the Classic menu enabled or Windows 2000, click
Start, Settings, Printers.
b. Right click on the Epson printer you just installed and click on
the Properties option.
c. Select the Ports tab and write down the port the printer is
assigned to. You will use this later in the PowerDriver IQ
software installation.
5. Insert the PowerDriver IQ CD into your CDROM drive. The
installation program should run automatically. (If the program
does not automatically run, click Start, Run. Browse to your
CDROM drive and click on Setup).