Filter
Top Products
LF/FF/LOAD
TEAR OFF
LF
advances paper one line at a time. To
feed your paper one line, press this button
once.
FF
advances the paper to the top of the
next page. To use this feature, press and
hold the button for about one second.
LOAD
loads paper on the push tractor of
the selected paper path when no paper is
currently loaded.
This button can also be used to run the
printer’s draft self test. See the section on
running the self test in Chapter 1.
Feeds the paper to the printer’s tear-off
edge and puts the printer in tear-off mode.
If the perforation of your paper does not
align exactly with the printer’s tear-off
edge, use the
MICRO FEED
buttons to
adjust the tear-off position. See the section
on adjusting the tear-off position in
Chapter 2.
This button can also be used to run the
printer’s NLQ self test. See the section on
running the self test in Chapter 1.
Caution:
Never use
the TEAR OFF
button with labels. Use the
LF/FF
button instead to feed the printed labels to a point where they
can be torn off
3-4
Using
the Printer