Filter
Top Products
Note:
You can print out the current DIP-switch settings by holding down
the
PAUSE
button while you turn on the printer.
Changing DIP-s witch settings
1.
Turn off the printer.
2.
Open the printer’s front cover by lifting the middle of its
bottom edge up until it locks in place.
3.
The DIP switches are located in a small compartment
on
the
front paper guide, behind the front tractor paper. If paper
is loaded on
the
front tractor, either remove it or lift it up
out of the way so you can reach the DIP switches.
3-8
Using the Printer