Filter
Top Products
d
Press the [LAN] button on the remote control, or select Display
the QR Code from the Network menu to display the QR code.
Remote control
Projector name
Key word
IP address
IP address Y
a
• When the projector is already receiving an image signal over
the network, the QR code is not displayed even if you press
the [LAN] button. Press the [
] button on the remote
control or the control panel (only when the source is LAN),
or select Display the QR Code from the Network menu to
display the QR code.
• To hide the QR code, press the [Esc] button on the remote
control or the control panel.
e
Read the projected QR code with your smartphone or tablet
device.
Make sure you read the QR code from in front of the screen so that
it fits into the guide. If you are too far from the screen, the code
may not be read.
When the connection is established, the image from the connected
device is displayed. Tap Files on the application screen, and then
select the file you want to project.
Hiding the Image and Sound Temporarily (A/V
Mute)
You can use this when you want to focus the audience's attention on what
you are saying, or if you do not want to show details such as when you are
changing between files during presentations from a computer.
Each time you press the [A/V Mute] button or open/close the A/V mute
slide, A/V Mute turns on or off.
Remote control Projector
Projection Functions
71