Filter
Top Products
Installation Requirements
The projector can be mounted on a ceiling or placed on a desk. Also, it can
be mounted at a tilted angle, so you can flexibly project images to various
places.
Warning
• A special method of installation is required when suspending the projector
from a ceiling (ceiling mount). If installation work is not carried out
correctly, the projector could fall down. This may result in injury or
accidents.
Contact your dealer or the nearest address provided in the Support and
Service Guide if you want to use this installation method. s Epson Projector
Contact List
• If you use adhesives on the Ceiling mount fixing points to prevent the screws
from loosening, or if you use things such as lubricants or oils on the
projector, the projector case may crack causing it to fall from its ceiling
mount. This could cause serious injury to anyone under the ceiling mount
and could damage the projector.
When installing or adjusting the ceiling mount, do not use adhesives to
prevent the screws from loosening and do not use oils or lubricants and so
on.
• Do not cover the projector's air intake vent or air exhaust vent. If either of
the vents are covered, the internal temperature could rise and cause a fire.
a
• An optional ceiling mount is required when suspending the
projector from a ceiling.
s "Optional Accessories" p.156
• When mounted on a ceiling, set Inv Direction Button to On so that
the operations and movement of the [
], [ ], [ ], and [ ]
buttons on the control panel match.
s
Extended - Operation - Inv Direction Button p.86
The projector can be installed at the following angles.
Vertical: Can be installed at any angle in a complete 360 degrees.
90
45
0
135
180
-135
-90
-45
Horizontal: Can be tilted within the range of expansion and contraction for
the rear feet.
s "Adjusting the Horizontal Tilt" p.27
Installing the Projector
20