Filter
Top Products
The projected images will appear as shown below after setting the screen
size.
Equal Larger Left
Larger Right
a
• You cannot enlarge both the left screen and right screen images at
the same time.
• When one image is enlarged, the other image is reduced.
• Depending on the video signals that are input, the images on the left
and right may not appear to be the same size even if Equal is
set.
Changing the audio
a
Press the [Menu] button during split screen projection.
b
Select Audio Source, and then press the [ ] button.
c
Select the audio you want to output, and then press the [ ]
button.
When you select Auto, audio is output for the largest screen.
If the screens are the same size, audio is output for the screen on the
left.
Ending the split screen
Press the [Esc] button to end split screen.
The following steps can also be used to end the split screen.
• Press the [Split] button on the remote control.
• Select Exit Split Screen on the Split Screen Setup screen.
s p.60
Restrictions during split screen projection
Operating restrictions
The following operations cannot be performed during split screen
projection.
• Setting the configuration menu
• E-Zoom
• Changing the aspect mode
• Using the [User1], [User2], or [User3] buttons on the remote control
• Help can be displayed only when image signals are not input or when
an error or warning notification is displayed.
Projection Functions
62