Filter
Top Products
Submenu Function
Setting RADIUS
Server Name
Set to On to perform authentication of the server name during
server certificate verification. By specifying the server name, you
can reduce the risk of connecting to an invalid authentication
server.
RADIUS Server
Name
Specify the authentication server name.
You can enter up to 32 single-byte alphanumeric characters. (^
cannot be used.)
Verify Exp. date
of Server Cert.
Set to On to perform verification of the certificate's validity
period during server certificate verification.
Wired LAN menu
Submenu Function
DHCP
You can set whether or not (On/Off) to use
DHCP
g
.
If this is set to On, you cannot set any more addresses.
Submenu Function
IP Address
You can input the
IP address
g
assigned to the projector.
You can enter a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Subnet Mask
You can input the
Subnet Mask
g
for the projector. You can enter
a number from 0 to 255 in each field of the address. However, the
following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway Ad-
dress
You can input the IP address for the gateway for the projector.
You can enter a number from 0 to 255 in each field of the address.
However, the following
Gateway addresses
g
cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
IP Address Dis-
play
To prevent the IP address from being displayed on the LAN
Standby screen, set this to Off.
List of Functions
97