Filter
Top Products
Interface
The following ports can be accessed by removing the interface cover.
For information on how to remove the interface cover and connect
video equipment,
s Quick Start Guide .
Name Function
A
HDMI input port
Inputs video signals from HDMI compatible video
equipment and computers. This projector is compatible
with
HDCP
g
signals. s Quick Start Guide
B
BNC input port
For analog RGB signals from a computer and
component video signals from other video sources.
s Quick Start Guide
C
Video input port
For composite video signals from video sources.
s Quick Start Guide
D
S-Video input port
For S-video signals from video sources. s Quick Start
Guide
Name Function
E
Cable holder
Connection may become defective when a thick heavy
HDMI cable is connected to the HDMI input port. Run
a commercially available cable tie through this holder to
prevent the cable from disconnecting.
F
Computer input port
For analog RGB signals from a computer and
component video signals from other video sources.
s
Quick Start Guide
G
Power inlet
Connects to the power cable. s Quick Start Guide
H
Remote port
Connects the optional remote control cable set and
inputs signals from the remote control. When the
remote control cable is plugged into this port, the
remote receiver on the projector is disabled.
I
RS-232C port
When controlling the projector from a computer,
connect it to the computer with an RS-232C cable. This
port is for control use and should not normally be used.
s p.111
J
Wireless LAN Unit
port (EB-Z8050W only)
Connects to the optional wireless LAN unit.
K
Monitor Out port
Outputs to an external monitor the analog signal from
the computer connected to the Computer input port or
the BNC input port. This is not available for component
video signals or other signals being input to any port
other than the Computer input port or the BNC input
port.
s
p.106
L
LAN port
(EB-Z8000WU only)
Connects to a LAN cable and then to a network.
s p.105
M
DVI-D input port
Inputs digital RGB signals from a computer connected
to the DVI-D output port. This projector is compatible
with
HDCP
g
signals. s Quick Start Guide
N
LAN Port
(EB-Z8050W only)
Connects to a LAN cable and then to a network.
s
p.105
Part Names and Functions
11