Filter
Top Products
Changing the Aspect for computer images
You can change the aspect of projected images input from the Computer, BNC, DVI-D, or HDMI input port as follows. The original aspect ratio is
16:10 because of the wide panel mounted on the projector. When projecting onto 16:9 screens, set the Aspect to 16:9.
Set Values Operation Projection example
Normal
(When the input source is a
Computer, DVI-D, or BNC)
Projects to the full projection size
retaining the Aspect of the input image.
When a 1024x768 signal is input
Auto
(Only availble when the
input source is HDMI)
Projects in an appropriate aspect based
on information from the signal being
input.
16:9
Projects to the full projection size at an
Aspect of 16:9.
When a 1024x768 signal is input
Functions for Enhancing Projection
27