Filter
Top Products
Connecting to a Computer
■ ■ ■ ■ ■
■
9
1. Connect the 9-pin end of the PS/2 mouse cable or, the
USB mouse cable to the Mouse/Com or USB mouse port
on the projector.
2. Disconnect your mouse from the mouse port on the back
of your computer and replace it with the other end of the
PS/2 mouse cable or USB mouse cable. (Your computer’s
mouse will be disabled while you are using the remote
control as a mouse.)
Connecting the Audio Cable
1. If you will be using audio, connect one end of the audio
cable to the Audio In jack on the projector.
2. Connect the other end of the audio cable to the speaker or
audio out port on the computer’s sound card.
Audio
n jack
audio cable