Filter
Top Products
2. Remove the printer cover, paper guide, and paper-tension
unit by lifting them up and off the printer.
3. Install the optional pull tractor in the pull-tractor position as
described in Chapter 2.
Note:
The optional pull tractor cannot be installed in the push-tractor
position.
4.
Load the continuous paper for the push tractor as described
in Chapter 2.
5. Turn on the printer. Press the LOAD/EJECT button to load
the paper, and then use
the LF/FF button
to feed two sheets
of paper through the printer.
6. Move
Caution:
Use the knob on the right side of the printer only to clear
paper jams when the printer is off. Otherwise, you may
damage the printer or cause if to lose the top-of-form
position.
the paper-release lever to the pull-tractor position.
7.
Load the continuous paper for the pull tractor as described in
Chapter 2.
4-14 Using Printer Options